1 Sep
2012
1 Sep
'12
3:05 p.m.
On 8/30/2012 2:22 PM, Tony Duell wrote:
The wiring for the DIN socket is exactly as Tony describes, including
the 12V line. So that should be easy to wire up. On the negative side
of things, the power supply's 5VDC line is basically AC at the moment.
This wouldn't be so bad except that the seller powered the system up
before listing it, so I hope nothing got damaged...
- Josh
The one I
purchased has a 5-pin DIN connector labeled "RF Modulator
Only" which gives me hope that the video interface is nothing too crazy
I cna
think of no sane reason to use an RF modulator with anything other
than a TV-rate video signal. And depending on coutry of origin, the
signal will either nbe 525 line RS170 or 625 lin system B/G/I (all much
the smae for this purpose). Neither are hard to find something to
display them.
I would guess the DIN socket carries ground, composite video and a power
supply line (12V?). I shouldn't be hard to trace them
-tony