Stains caused by Cigarette smoke

< > While isopropanol is good wash a trip through the dish washer works ev < > time for me. Air dry or a cool oven to get out any trapped water. < < This is really good information I am going to try this on one computer < collection. This unit is so Gummed up by Cigarette smoke I can't even st < to be in the same room with it, It actually makes my sinuses get irritat < and makes me sneeze while this machine is on. I opened it up and there w < sticky film all over the components, almost like a fungus growing on it < cigarette tar.. I was going to get rid of it as it smelled so bad, so I < this works.. this takes me back some to a customer that was making TV converter boxes (legit). Seems the boards were assembled in Mexico and then tested in Texas. Then would fail after a few hours... seems fungus growing on the board from the bad water (recirculated and reused excessively) used would cause high resistance shorts that would affect the microprocessor crystal clock. The fix was a was a wash in good Texas water. Actually, a clean board has a lower fail rate as the cooling is better, no dust or grunge. Case parts can also be cleaned that way if they fit, me I take them out in the driveway and use the hose and a bucket of soapy water. With care you can clean most anything with soap and water... assuming the object itself isn't water soluble. ;) Allison