27 Nov
2007
27 Nov
'07
7:18 a.m.
----- Original Message -----
From: "Liam Proven" <lproven at gmail.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Tuesday, November 27, 2007 9:55 AM
Subject: Using a DB13W3 monitor on a PC
(Since no-one seemed to notice this as a comment to an
older thread...)
I recently got given a decent 21" colour monitor with a DB13W3
connector on it. Never used one of these before.
In the same pile of stuff was a Mac video connector to DB13 cable.
I've tried this on an old Beige G3, and also via an SVGA-Mac convertor
on a PC. It gives a good sharp picture, but on both systems, red and
green were reversed.
Does this mean my cable's incorrectly wired up or doesn't belong to
this monitor, or is that something to do with using a DB13 monitor on
a modern PC?
--
I think it depends on the monitor you have and the video card/system you are
using.
A Google search (newsgroup posts not the web) turned this up:
http://groups.google.com/group/oh.forsale/browse_thread/thread/4f2ed0a58715…
The poster commented on how a specific SUN monitor (Sun GDM 1662B ) had the
red and green switched to conform to Mac specs.