18 Oct
2015
18 Oct
'15
4:32 p.m.
On 10/18/2015 5:12 PM, Zane Healy wrote:
On Oct 18, 2015, at 3:16 PM, Jules Richardson
<jules.richardson99 at gmail.com> wrote:
If you can make a copy of the roms. If you find a FPGA clone board
of the game, you still need roms.
Ben.
On 10/18/2015 11:48 AM, Zane Healy wrote:
If you get that far, then it may have been a monitor problem, rather
than a board problem. Or the board problem is in the video
circuitry.
Here is the link I meant to send.
http://hacks.slashdirt.org/hw/supergun/
Even now typical cabinets only have one JAMMA board.
I've been researching a project I'm getting ready to start in on. I
want to make some custom arcade controllers as I love the old 8-bit
game systems, but the old controllers are *painfully* bad. As a
result I've come across these things on a few pages. You can find
them cheaper on eBay. It looks like they do what you want.
http://www.focusattack.com/gonbes-gbs-8220-v3-cga-ega-yuv-to-vga-arcade-hd-…
Right now I'm stuck on figuring out the best option for housing my
controller. The first will be a simple Atari joystick replacement
that replaces the joystick with 4 Happ arcade buttons and two fire
buttons (so it can be used for either Atari 2600 or 7800. That's
child's play, a good housing isn't.
Zane
On Oct 18, 2015, at 9:20 AM, Jules Richardson
<jules.richardson99 at gmail.com> wrote:
Linky not appearing :-(
I just hooked the board up to a PSU and a speaker, and it makes
promising tuneful noises (at ear-bleeding volume*) - so it seems
like basic CPU, RAM and ROM are there at least.
* I've no idea what the original impedance would have been, or how
many a typical cab had (more than one?). It came from an Aero Fighters cab - board says
"IT-19-02" in
the corner. I've no idea if it was a one-off for this game or
if other games used the same board with different firmware.
If you can get it working, it should be a fun game! I love Aero
Fighters 2 & 3 (aka Sonic Wings) on the Neo Geo.
Looks like this page might have some details to help.