American Automation emulators?

Joe R. wrote: I suspect you have some ezpro adapter cards. There was a largeish box that was the main system that these attached to, about the size of a large cereal box (really large). It had a terminal attached to it, and was serially controlled, since it predated all the gui crap that is around today. We have one or two stashed around here, but they are rare. I have only seen two on Ebay in several years that were worth buying. I guess people kept the parts that were labeled related to target processors, and trashed the main box for some reason. The ML 4100 analyzer would not have a socket on it, and would have a 60 pin cable that goes to the 4100's front connector. The ML 4400 has to have special analog circuits on the pods, and has several plug in cards, ranging up to some that are pretty competitive with the HP 16500s with 2m x 500mhz deep capture cards in them. The bad news is that the pods are rare, as most ML4400's were married with Pentium or Pentium Pro run controls that had custom logic for the analyzer, and no general purpose way to hook up to the devices under test. Jim