Dave,
I'm located in Pittsburgh and may be interested in some items that you have.
I'm trying to get a group together to showcase our collection for the
local Science Center here.
Together with my collection and others we hope to put on a nice exhibit.
At the moment, I was looking to see what S-100 boards and peripherals
you found.
I guess when you get things inventoried, I'll know better what we could use.
thanks,
Dan
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[ My Corner of Cyberspace ]
[
http://ragooman.home.comcast.net/ ]
[ Pittsburgh Robotics Society Got Robot ? ]
[
http://www.pghrobotics.org/ ]
[ Pittsburgh Vintage Computer Society Classic Computers ]
[
http://groups.yahoo.com/group/pghvintagecomp/ ]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Dave Dunfield wrote:
Hi guys,
I just returned from the East coast (New Brunswick Canada) where I met
with a gentleman who had a large collection of vintage equipment for
me - Brought back one pickup truck worth, and will be returning next
month for the rest - 1200km each way - by the time I am finished, I
will have travelled nearly 5,000km!
Here's what I received in total:
S-100 systems:
IMSAI 8080
NorthStar Horizon
Cromemco Z-2D
Cromemco System-3 (Older model with the dual/quad persci drives).
Compupro 8086 S-100 system
Wynchester
Compuduct "Rainbow" (near S-100, has non-standard/tall cards).
Multiflex mainboard with 4 S-100 slots & CPU card.
Protec PRO-80 - Canadian SBC with one S-100 slot
Box with 40-50 S-100 cards - in addition to the systems which are well
populated - Found a number of Mits and IMS cards, also a Hayes Micromodem
100 - CPUs, disk controllers, memory etc. - haven't inventoried it all
yet
non S-100:
Altos 586
Dec Rainbow
Xerox 820-2 (with spare mainboard).
2x Dy4 Orion-V (STD bus Z80-CP/M system)
Ohio Scientific SuperBoard-2 (in enclosure)
Acorn Atom
Nelma Persona (Canadian CP/M system)
BMC IF800
Visual 1050
MAI Basic Four
NEC APC
NEC N5200/05
Megatel Quark (ultra small Canadian SBC)
HAL (early Canadian IBM clone)
Osborne-1 (1st edition "tan")
Epson PX-8
Also, an ADM-3A terminal (good screen), as well as several boxes of
odd's and ends, and boxes and boxes of documentation and software.
Even got a nice little addition to my calculator section: A "Sinclair
Scientific" complete with hard carry case and manual.
Not quite sure where it's all going to go ...
I also received a disassembled Grid Compas 1101 which had a battery
leak causing irreparable damage to the mainboard - however there are
lots of parts, bubble memory modules, complete documentation and
original disks - if anyone needs any of these parts, please contact
me.
Coupled with the material I acquired in January, I figure this should
keep me busy scanning and archiving for a good long time - Some of the
material I am not very familier with, so I will no doubt be turning to
the list for information from time to time...
Regards,
Dave
--
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 4/25/2005