17 Mar
2004
17 Mar
'04
12:34 p.m.
meltie wrote:
Hey Guys
I've got a few DEChub90s - sweet things they are too. However, I don't wnt
the bulk of them at the moment until we move to the New House.
I'd like to run one of the modules - a DECserver90TL, not that it matters
really which module it is - standalone.
There's the largeish 16x3 rectangular backplane connector, and a smaller
DIN-ish port. Where does the PSU connect on models that were born to be
standalone?
I have one of these DECserver90TL's too and it came with the WRONG
external power supply so I had to figure it out for myself.
ascii art of the multipin connector:
GGGPPP
+---------~------+
|ooooooooo~oooooo|
| |
|ooooooooo~oooooo|
+--------~-----+
=============~==========
The picture is looking into the back of the unit with the narrow end of
the connector down.
The pins at the top marked G are ground and the pins marked P are +5V.
I eventually rewired my PS to fix the DIN connector, but my notes don't
show how I did it...
TIA
alex/melt