Smile, and keep your eyes open for a better system. As
has been pointed
out
For 40$ thats not bad but it's incomplete unless the disks are there then
it's
much more.
If you were seriously into PDP11 and shipping it didn't cost a bomb
$40-50
isn't much for spares.
it doesn't have any serial port boards and it took
Allison's note to get
me
to wondering if there are even any on the CPU board...
There are on my
/23+'s, but not on my /23. There is a good chance that isn't a usable
system.
Serial cards are gotten cheap. The M8189 (11/23 and 11/23+ <or B>)
has two serial ports and the equvilent of the M8012 on it, the M8186
does not have anything but basic CPU so you need the M8012
and a serial line card or two. Either CPU can be used in the same
box.
Besides if that is a complete system it's probably in a 4' 19" rack!
With RL01/2, RX01/2 and BA11S or N box that could be stuffed into a 36"
small office rack, likely it's a 40, 48" or larger one.
Allison