25 Jul
1999
25 Jul
'99
3:16 p.m.
I found the above box recently and would like to get it
up. Can anyone
help me with info on this? The ram has been pulled as has the cpu so I
need to know what its chip settup was. Seems to be Intel stuff
otherwise. There are numerous adds on the net re; ram for this but
virtually no other info. Other than that, the information I've collected
is that it ran off of Dos (!?!) and was used in a token ring.
Interesting layout inside.
I believe there are multiple 433 systems... if the type you have is
a table-top unit about two inches thick with the 3.5" floppy on the
right side of the unit, I might be able to help... contact me off-list.
I also need to know if there was anything special
about the floppy
drive as I'd need to replace that as well. Last, is there anyway to rig
a harddrive into one of these?
Again, if it is the one I mentioned above, yes, you can have a hard
drive -- but it has to be a notebook-type 2.5" drive. I think the
floppy is a standard RX23... though you might be able to put in an
RX26 (2.88Mb).
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+