19 Mar
2013
19 Mar
'13
6:33 a.m.
On Mon, 18 Mar 2013, Dave Land wrote:
On 3/18/13 6:14 PM, Terry Stewart wrote:
Yep, found that out. Thanks Terry. I checked your site and found the link
back to Dave Dunfield's for the floppy images. I tried mrynet.com, but their
FTP seems to be down at the moment. I'll probably try to image a couple of
disks later tonight. :)
Dave, don't forget to check out the Kaypro section of the Don Maslin
archive over at http://www.retroarchive.org - there are a LOT of disk
images.
g.
--
Proud owner of F-15C 80-0007
http://www.f15sim.com - The only one of its kind.
http://www.diy-cockpits.org/coll - Go Collimated or Go Home.
Some people collect things for a hobby. Geeks collect hobbies.
ScarletDME - The red hot Data Management Environment
A Multi-Value database for the masses, not the classes.
http://www.scarletdme.org - Get it _today_!
jumper
setting on these old full bay 5 1/4 floppies to select the drive
ID? Any ideas?
In my Kaypro II, the Tandon M-100 drives use an IC-type jumper for
drive select, not the cable. Remember to swap the terminating
resistor too.
Terry (Tez)