Other PDP11 simulators

On Saturday 02 October 2004 14:13, Stan Barr wrote: Sure it will, just start it like: getty -in -l /usr/bin/pdp11 ttyS0 9600 vt100 (getty syntax will vary depending on the getty that's installed on your machine. The syntax above works with "agetty" as distributed with Debian GNU/Linux). Or you can just run a normal getty on your serial port, and log into the *nix via the serial port and run simh. So, if you felt creative, you could do: getty -in -l /usr/local/bin/pdp11-script.sh ttyS0 9600 vt100 sleep 10 # or whatever you feel like getty -in -l /usr/local/bin/telnet-script.sh ttyS1 9600 vt100 sleep 1 getty -in -l /usr/local/bin/telnet-script.sh ttyS2 9600 vt100 sleep 1 getty -in -l /usr/local/bin/telnet-script.sh ttyS3 9600 vt100 sleep 1 getty -in -l /usr/local/bin/telnet-script.sh ttyS4 9600 vt100 sleep 1 # repeat as necessary And have a pdp11-script.sh which sets up and runs simh appropriately, and a telnet-script.sh like: #!/bin/sh telnet localhost 10000 ...assuming that you have port 10000 as the TCP port you gave to simh for connections to your simulated DZ11. I'm tempted to cook up a small Linux/simh image that'll do this. Pat -- Purdue University ITAP/RCS --- http://www.itap.purdue.edu/rcs/ The Computer Refuge --- http://computer-refuge.org