27 May
2016
27 May
'16
10:36 a.m.
Hi
Our order for front panel blanks has now arrived. We have enough
to make ten of each of
PDP-8/e (A)
PDP-8/e(B)
PDP-8/f
PDP-8/i *
PDP-8/L *
PDP-8/m
* New - uses a 465mm x 150 mm panel
I'm expecting production of PDP-8/e (A) and PDP-8/e(B) to start on
Tuesday 31-MAY-2016 at one layer per day (allowing for drying time) plus
set up and packing. The first panels should start coming off the line on
or about 8-JUN-2016.
PDP-8/f and PDP-8/m should start about the 13-JUN-2016 finishing about
22-JUN-2016
Followed by PDP-8/i
Followed by PDP-8/L
Followed by PDP-II/XX
Price remains unchanged at USD150.00 per panel plus USD20 shipping.
Payment to PayPal rodsmallwood52 at btinternet.com
There's only ten of each type so one of each type per customer please
Back orders ship first then in order received sequence.
_*Just a quick note about production techniques. *_
The printing is done by hand on a printing table. Its a big heavy cast
iron tray about a foot deep and five feet square. It stands about three
feet high There are hundreds of small holes in the bottom to allow a
vacuum to hold down whats being printed. On top of the table is an
arrangement of bars and slides to allow one or more silk screen frames
to brought down on a work piece held down by the vacuum.
Next to the table is the drying rack. It looks like half a giant
rolodex. You put your wet work between the pages.They are made of open
mesh panels to allow air to circulate.
You start by marking the position of the blank panel on the bottom of
the table. Then the first screen is positioned over the work and
horizontal movement locked. You can still move the frame vertically.
Position your work between the marked guides on the bottom of the table.
Bring down the frame and drag the ink across the screen. Put the wet
printed blank in the drying frame and repeat for each panel in the batch.
Wait 24 hours and setup your next fame for the next layer(color) Take
first panel out of drying rack print and replace.
Repeat for each board in the batch until done. Cycle time per batch
about eight days elapsed.
Rod (Panelman) Smallwood