22 Feb
2018
22 Feb
'18
1:28 p.m.
On Feb 22, 2018, at 1:23 PM, dwight via cctalk
<cctalk at classiccmp.org> wrote:
Do not remove the chip from the bias magnets. All will be lost if you do.
Is my understanding correct that removing the entire 7110 module as a unit (whether
socketed or soldered in) should be somewhat safe, but any attempt to disassemble the
module would likely disturb the bias field and destroy the data?
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/