23 Aug
2007
23 Aug
'07
6:21 p.m.
Hi All
With regard to changing the tube in the VR201 and following the
advice I had been given. I set about locating a replacement tube.
I opened up half a dozen Dec and HP terminals. All with the same result.
In all cases the EHT connector was on the short side of the
tube and the tube had mounting lugs attached to a metal band arount the
front of the tube. Contrast this with the VR201 which has the
EHT connector on the long side and a wire frame arrangement to hold the
tube in.
Comments welcome
Rod Smallwood
The DecCollecctor