1 Jun
2016
1 Jun
'16
11:39 a.m.
On 01/06/2016 19:21, Glen Slick wrote:
On Wed, Jun 1, 2016 at 11:05 AM, Rod Smallwood
<rodsmallwood52 at btinternet.com> wrote:
That's probably right. However as
my system does not do what the manual
says it should
I cant get there to change that.
Rod
You could if you were able to get into ODT. I
have yet to discover how you
get there.
Read the manual. See that setup option K is the Halt on Break option
which has a factory default setting of 0, which ignores console breaks
from the terminal Break key. If you set that option to 1 it enables
the processor to halt if the console SLU detects a break condition
from the Break key on the terminal, which should cause console ODT
mode to be entered.
http://www.bitsavers.org/pdf/dec/pdp11/1193/
EK-KDJ1E-UG-001_KDJ11-E_CPU_Module_Users_Guide_Jan91.pdf
3.2 Console ODT Entry Conditions
4.2.6 Setup Command
4.2.6.2 Setup Mode Command 2 ? Select Configuration Parameters
K - Halt-on-Break
Table 4-12 Halt-on-Break Parameter Variations