3 Jan
2014
3 Jan
'14
7:22 a.m.
On 12/15/13, 10:48 PM, Charles wrote:
I'm looking for a BC80J-20 cable... that's the
one that goes from the
RL controller card to the first drive, with a 40 pin header on one end
and that big quick-release connector on the other end.
(I am tired of failures and damage to the rigged ribbon cable/IDC
header I've been using, and now that I'm chasing a fault in my
two-RL02 system, I can't swap drives without taking the cover off to
get to the header connectors inside).
I think I'm looking for one of these as well. Or maybe someone here can
point me to what I really want :-)
I have an RL02 driver and an RL02 controller, but I seem to have
lost/misplaced the "cabinet kit". I could swear I had one at one point.
So, the RL02 drive has a terminator and a nice long round cable which
seems to have a 2x.1" header. But I believe I need the cable part which
is normally install on the cpu cabinet. My guess is it would cable a
shielded ribbon cable with a connector for the board header and the
other end would have a metal bracket and something to mate with the nice
round cable...
Is this even close?
-brad