23 Oct
2013
23 Oct
'13
10:35 p.m.
Il giorno gio, 24/10/2013 alle 13.02 +1100, Nigel Williams ha scritto:
On Wed, Oct 23, 2013 at 4:18 PM, supervinx
<supervinx at libero.it> wrote:
Hmmm, but this one has a SCSI2 (50pin) connector, while my P03 has
a
SCSI3 (SCSI68) connector on the back...
Did you add a SCSI50 to SCSI68 adapter or your P03 has a different
connector on the back?
I own a similar cable, but it has a VHDC connector, it's for a PS2 95,
but the termination it's the same... can't forget that ugly brick ;)
Well, I used a 7202-001 and a 7206-005, with no
luck, as external
drives.
Then I tried a lot of internal drives.
Same result: the tape is unsupported.
mine (being external) is set to SCSI ID #4
...it's not enough, because all 68 lines must
be terminated, so the cable
it's critical...
yes, as anyone who has played with IBM midrange quickly discovers, the
correct cables are critical.
This is the cable I have:
http://www.ebay.com/itm/IBM-Cable-SCSI-2-SE-Single-Port-RISC-RS-6000-32G039…
IBM P/N: 32G0397