1 Aug
2001
1 Aug
'01
3:45 a.m.
Doug Carman wrote:
I am in the U.S., this is a 110 volt configuration.
System configuration:
PDP-11/70 CPU KB11-C w/FP11-C, 0 RH70's, 1 DL11W, 1 RX211
MK11 1024KW
BA11 w/1 DZ11, 1 RL11, 1 KLESI, 1 DELUA, 1 UDA50
RX02
SA72 w/4 RA72
RL02
TU81+
LA120
Intresting config. I'm not going to put too much on it, as I do not
want to grow beyond the 5 available Unibus SPC slots. What I had in
mind as the setup is :
DL11-W
RL11
Emulex SCSI (emulates RA80/RA81/RA90 etc., I use a Jazz & Zip drive
for storage & backup in my 11/84)
PC11 or RX211
TU80
I simply do not have the room to put in a 5th cabinet, alhough that
would be ideal.
The entire system is fed with a single 220V 30A
circuit which is split
into two 110V 30A circuits through an 861-D power controller.
I have to use a
single phase 220V/16A line or to upgrade it to a 20A
fuse.
Ed
--
The Wanderer | Politici zijn gore oplichters.
quapla(a)xs4all.nl | Europarlementariers: zakkenvullers
http://www.xs4all.nl/~quapla | en neuspeuteraars.
Unix Lives! M$ Windows is rommel! | Kilometerheffing : De overheid
'97 TL1000S | weet waar je bent geweest!