11 May
2021
11 May
'21
7:59 a.m.
The rivets are likely more of a safety thing than an issue warrantee repair thing. The
inside of a Apple II is intended to have user access. The switching supply has 300 to 400V
DC inside. Definitely a potential lethal hazard.
I hate those filter caps. I had one go at the last Maker Faire ( no more ? ). I was trying
out the Oregon trail when the nasty smoke started pouring out. Luckily we had a drill
handy to remove the rivets.
Dwight
________________________________
From: cctalk <cctalk-bounces at classiccmp.org> on behalf of David Williams via
cctalk <cctalk at classiccmp.org>
Sent: Monday, May 10, 2021 5:34 PM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: Apple II PSU
On 2021-05-10 18:18, Fred Cisin via cctalk wrote:
This area is so backward, that metric drill bits are
considered
esoteric!
1/8" works OK, and will chuck in a Dremel.
If it were a damaged screw, rather than a rivet, I would use a
left-handed drill bit.
Which is pretty much what I ended up with. Surprised that this unit
looks in such good shape inside, I expected to see it already exploded.
Well time to get to work on it now and see if I can't get a working unit
out of it.
David Williams
www.trailingedge.com<http://www.trailingedge.com>