10 Apr
2004
10 Apr
'04
1:40 a.m.
In message <m1BC2pD-000JAXC@p850ug1> you wrote:
I've just
swapped out the cap with a cheapo 85C 1uF and the PSU is working
again. Now I need to find some way of repairing the casing. Two of the
screw-posts seem to be OK, but the other two have disintegrated. Only one of
the two remaining screw-posts seems to work - the screw keeps slipping out of
the other.
So on the one hand I've got a working Acorn A4 power supply. On the other
hand, the casing is knackered :-/
Thanks.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem(a)dsl.pipex.com | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
... Beauty is in the eye of the beer holder....
I've
replaced all the electrolytics on the LV side that I could see. I've
just noticed a 1uF 50V that I missed - I don't think I've got a 1uF 50V 1=
05
deg C in stock though.
I think any 1uF 50V (or higher) would do to prove the point :-).