20 Feb
2019
20 Feb
'19
8:32 p.m.
After spending way to much time on this today, I verified that at
least on the CMD CQD Q-Bus SCSI controller versions that I have if I
wanted the CMD CQD controller to report an MSCP disk size of exactly
891072 blocks to match the SIMH emulated RA81 disk size, I had to soft
resize the capacity of the SCSI hard drive to be 2 blocks larger, i.e.
a capacity of 891074 blocks. This is with the CMD CQD controller reset
to the default configuration with the 'Z' configuration option. The
behavior of Q-Bus SCSI controllers from other vendors will be
different.
After doing that I verified that VMS on a VAX CPU, and also the
2.11BSD standalone disklabel on a PDP-11 CPU saw an MSCP disk size of
891072 blocks with the SCSI disk size of 891074 blocks attached to the
CMD CQD Q-Bus SCSI controller.
I then installed RSTS/E 10.1 on a SIMH RA81 and then did the
equivalent of a dd from the SIMH RA81 disk image file of size
456,228,352 bytes to the SCSI hard drive of capacity 891074 blocks.
Then the PDP-11 CPU booted RSTS/E 10.1 from SCSI hard drive attached
to the CMD CQD Q-Bus SCSI controller.
Sorry for the extra long message. Gory details below. If I don't add
the details now I'll forget all the details myself tomorrow.
Resizing the 9GB SCSI hard drive down to a capacity of 891074 blocks
on a Windows PC using sg3_utils-1.37 (I seem to recall that previously
I tried this with a newer version of sg3_utils and something didn't
work right):
C:\sg3_utils-1.37>sg_scan
PD0 [C] HDS728040PLAT20 PF1OA21B
PD1 IBM DDRS-39130D DC1B
CDROM0 [Z] TEAC CD-224E 1.7A
C:\sg3_utils-1.37>sg_inq pd1
standard INQUIRY:
PQual=0 Device_type=0 RMB=0 version=0x02 [SCSI-2]
[AERC=0] [TrmTsk=0] NormACA=0 HiSUP=0 Resp_data_format=2
SCCS=0 ACC=0 TPGS=0 3PC=0 Protect=0 [BQue=0]
EncServ=0 MultiP=0 [MChngr=0] [ACKREQQ=0] Addr16=0
[RelAdr=0] WBus16=1 Sync=1 Linked=1 [TranDis=0] CmdQue=1
[SPI: Clocking=0x0 QAS=0 IUS=0]
length=164 (0xa4) Peripheral device type: disk
Vendor identification: IBM
Product identification: DDRS-39130D
Product revision level: DC1B
Unit serial number: RE1X3474
C:\sg3_utils-1.37>sg_readcap pd1
Read Capacity results:
Last logical block address=17849999 (0x1105e8f), Number of blocks=17850000
Logical block length=512 bytes
Hence:
Device size: 9139200000 bytes, 8715.82 MiB, 9.1392 GB
C:\sg3_utils-1.37>sg_format --count=891074 --resize --verbose pd1
inquiry cdb: 12 00 00 00 24 00
IBM DDRS-39130D DC1B peripheral_type: disk [0x0]
PROTECT=0
mode sense (10) cdb: 5a 00 01 00 00 00 00 00 fc 00
mode sense (10): pass-through requested 252 bytes but got 28 bytes
Mode Sense (block descriptor) data, prior to changes:
Number of blocks=17850000 [0x1105e90]
Block size=512 [0x200]
mode select (10) cdb: 55 11 00 00 00 00 00 00 1c 00
Resize operation seems to have been successful
C:\sg3_utils-1.37>sg_readcap pd1
Read Capacity results:
Last logical block address=891073 (0xd98c1), Number of blocks=891074
Logical block length=512 bytes
Hence:
Device size: 456229888 bytes, 435.095 MiB, 0.45623 GB
Verifying that the SCSI hard drive with a capacity of 891074 blocks
attached to the CMD CQD Q-Bus SCSI controller is seen as a drive with
a capacity of 891072 blocks on VMS on a VAX CPU:
$ MOUNT /FOREIGN BA215$DUA0:
%MOUNT-I-MOUNTED, OVMSVAXSYS mounted on _BA215$DUA0:
$ SHOW DEVICE /FULL BA215$DUA0:
Disk BA215$DUA0:, device type RA81, is online, allocated, deallocate on
dismount, mounted foreign, file-oriented device, shareable, available to
cluster, error logging is enabled.
Error count 0 Operations completed 4
Owner process "SYSTEM" Owner UIC [SYSTEM]
Owner process ID 00000214 Dev Prot S:RWPL,O:RWPL,G:R,W
Reference count 2 Default buffer size 512
Total blocks 891072 Sectors per track 217
Total cylinders 411 Tracks per cylinder 10
Volume label "OVMSVAXSYS" Relative volume number 0
Cluster size 0 Transaction count 1
Free blocks 0 Maximum files allowed 0
Extend quantity 0 Mount count 1
Mount status Process ACP process name ""
Volume Status: Unknown ACP type.
Verifying that the SCSI hard drive with a capacity of 891074 blocks
attached to the CMD CQD Q-Bus SCSI controller is seen as a drive with
a capacity of 891072 blocks on the 2.11BSD standalone disklabel on a
PDP-11 CPU (ignore the "45Boot" which is a 2.11BSD bug that is fixed
in a newer patch to correctly report "53Boot" on an 11/53 CPU).
9 8 7 6 5 4 3 2 1
Commands are Help, Boot, List, Map, Test and Wrap.
Type a command then press the RETURN key: BOOT MU0
MU0
45Boot from tms(0,0,0) at 0174500
: tms(0,1)
Boot: bootdev=06001 bootcsr=0174500
disklabel
Disk? ra(0,0)
'ra(0,0)' is unlabeled or the label is corrupt.
Proceed? [y/n] y
d(isplay) D(efault) m(odify) w(rite) q(uit)? D
d(isplay) D(efault) m(odify) w(rite) q(uit)? d
type: MSCP
disk: RA81
label: DEFAULT
flags:
bytes/sector: 512
sectors/track: 217
tracks/cylinder: 10
sectors/cylinder: 2170
cylinders: 410
rpm: 3600
drivedata: 0 0 0 0 0
1 partitions:
# size offset fstype [fsize bsize]
a: 891072 0 2.11BSD 1024 1024 # (Cyl. 0 - 410*)
d(isplay) D(efault) m(odify) w(rite) q(uit)? q
Label changed. Discard changes [y/n]? y
45Boot from tms(0,0,1) at 0174500
:
Booting RSTS/E 10.1 from the SCSI hard drive with a capacity of 891074
blocks attached to the CMD CQD Q-Bus SCSI controller after the SIMH
emulated RA81 disk image file with the RSTS/E 10.1 was dd to the SCSI
hard drive:
9 8 7 6 5 4 3 2 1
Commands are Help, Boot, List, Map, Test and Wrap.
Type a command then press the RETURN key: BOOT DU0
DU0
RSTS V10.1-L RSTS (DU0) INIT V10.1-0L
Today's date? 20-FEB-19
Current time? 19:46
Start timesharing? <Yes>
<stuff deleted>
RSTS V10.1-L 20-Feb-19 07:46 PM
User: 1,2
Password:
Jobs detached under this account:
Job What Size State Run-time RTS
1 ERRCPY 5K SR 13.6 ...RSX
3 OMS 9K SL 1.6 ...RSX
4 PBS... 19K SL 1.6 ...RSX
Job number to attach to?
Last interactive login on 20-Feb-19, 07:46 PM at KB0:
Last non-interactive login on 20-Feb-19, 07:46 PM
3 other users are logged in under this account
$ SHOW DISK
Disk Structure:
Dsk Open Size Free Clu Err Name Level Comments
DU0 22 891072 837824 94% 16 0 RSTS10 1.2 Pub, DLW