21 Mar
2017
21 Mar
'17
5:49 a.m.
Found at least one issue, open trace next to a via on the adapter. Ran out
of time to keep checking.
-pete
On Tue, Mar 21, 2017 at 4:10 AM, Rik Bos via cctalk <cctalk at classiccmp.org>
wrote:
The HP 9000/382 only supports SE scsi and the drive
needs to be terminated.
-Rik
Van: Pete Lancashire via cctalk
Verzonden: dinsdag 21 maart 2017 07:17
Aan: General
Onderwerp: Suggestions why SCSI 80 drive w/ SCSI2 (50) adapter will not
spin up ?
Host is a HP 9000/382
Copied the orig drive using a linux box, adaptec 2940N and good old dd
Then swapped drives, a unused 9 GB 80 pin with a Chinese 80 to 50
adapter.
Did have to issue a spin up command and then copied the data to this drive
again with dd.
Powered all off, added a motor start jumper to the adapter and put it on
the
9000/382. Motor will not start, added a jumper right on the drive, no spin.
so .. any ideas what I'm doing wrong, or just try a different drive ?
-pete