On Wed, 7 Apr 1999, Merle K. Peirce wrote:
If I remember right, that 15 meg disk was REALLY
large, although I may be
thinking of an earlier version. Measurements would be about 9" thick by
25-30 deep, nearly as broad. I don't think that'd fit in the case without
a lot of coaxing. I know we have a couple of those old drives
squirrelled away, and they aren't small. Neither is the one for the 6000
You mistake the container for the contents. The external drive unit
was in a larger box than necessary even when it first came out. The
box contained the power supply, the controller board for all four
drives (the card in the computer was basically a bus adapter to give
the 2/12/16/6000 system a Model 3/4 expansion bus) and a full height
5.25" Tandon drive. The drive in the 6000HD (available as an
upgrade for the 12 and later systems) was a half-height unit and
allowed only one secondary drive while the external primaries
allowed three.
--
Ward Griffiths
"the timid die just like the daring; and if you don't take the plunge then
you'll just take the fall" Michael Longcor