Calcomp 1039 plotter docs?

Hi All, the 1039 is an interesting plotter I have got a 1038/1039 as well: There are two big PCBs inside - one is for the low level functions (essentally driving the servos and drawing lines using TTL implemented Bresenham) the second one contains the computer (68xx based) which is handling the communication. So for simply moving the pens with the arrow buttons, the computer PCB may not be necessary. Have you tried this? The computer PCB controls the LEDs and blinking may well indicate a problem on the computer PCB - I thinke I have got a set of documentation. But unfortunately it is stored away, but surely I can do a search within the next four weeks if there is real interest. I even read out the bipolar PROMs of the processor card for safety some years ago... Erik, erik at baigar.de > tony duell <ard at p850ug1.demon.co.uk> hat am 20. September 2015 um 20:02 > geschrieben: > > >> Hi All, >> >> we have a 1039 in our space with the user guide, but without any service >> docs. Our specimen does not react to buttons except the reset and test >> buttons. the four statusleds light up on a reset and after a second the >> center two leds start blinking in sequence. paper and pens are loaded as >> per the user guide. > > Silly question... It doesn't happen to use 2114 RAMs does it? If so, check > and/or > replace them. I've foudn such RAM in printers/plotters from many manufacturers > and perhaps 90%+ of electronic problems are caused by them. > > -tony