6 May
1999
6 May
'99
4:27 a.m.
You quoted the FAQ (which I also read) as needing to
connect "ground" to
pin 7 but on the MMJ connector there is no "ground" pin. Just the two
differential drive TD and RD pairs. This is the question I had, how to
handle the ground situation.Do I :
1) Connect TD- and RD- together and then make those ground?
2) Use one of TD- or RD- ?
3) None of the above, do something else?
--Chuck
?????! Check again, your using RS422 differential not 423.
Allison