12 Dec
2012
12 Dec
'12
12:38 p.m.
Op 12 dec. 2012 om 21:11 heeft "Henk Gooijen" <henk.gooijen at
hotmail.com> het volgende geschreven:
And my VAX-11/750 runs on 220/240 VAC 50 Hz.
Although at the moment, the mains fuse in the house blows when
I turn the key :-( In my previous home the machine ran well on
a 16 Amps group. I have no clue yet as to why it blows the fuse
of the 16 Amps group after the move to this house.
- Henk
Did you try a slow fuse ?
Or B-automaat problably the turn on current is to high. Slow fuses are been used for
welding equipment with high turn-on currents.
- Rik
On Tue, Dec 11, 2012 at 8:17 PM, Chuck Guzis<cclist
at sydex.com> wrote:
Just to provide another data point, my 11/750 is the 110VAC variety.
alan >On 12/11/2012 03:34 PM, Ethan Dicks wrote:
>
> >>The 11/750 was physically smaller, used 110VAC... limited initially
> >>to 2MB (later 8MB, then finally 14MB)...
>
>We ran ours on 208V, I think we had 4MB; we used a Fuji Eagle drive and >a
>CDC cartridge drive for disks and a Cipher streamer for tape. It >worked
>pretty well.
I'm sure they must have made a 220VAC model, but I've
only ever seen
the 110VAC type (sample size > 2)