Guy Sotomayor wrote:
Can someone point me at the requirements for running a
version of RT-11
(like v4 or v5.3, v5.4) on a PDP-11/20. I'm pretty sure I can
get enough memory (in a BA11-K expansion chassis) but I want to know if
there are other "gotchas" (like having an EAE).
Jerome Fine replies:
There is one gotcha that should be considered - while there are
arrangements to run V5.03 and prior under the SIMH emulator
for hobby users (I presume that using a real DEC PDP-11/20
is ONLY for hobby use), that is still not legal without a very
expensive license for a Unibus product - I think that the PDP-11/20
is a Unibus.
As for actually being able to run, if you can get a copy on
a bootable RX01 floppy, RT-11 should actually run - very
slowly. An EAE is not required.
BUT, I have never had the opportunity to try is myself,
so I am not actually positive it can be done.
Also, it might not be possible to run V5.06 in which
there is no longer an RT11SJ flavour. But up to V5.05
should probably be OK as long as V4.00 will still work.
Also does anyone know where there is a reasonable copy
of DOS/BATCH? I
tried an RK05 image that's around on the 'net on one of the simulators
and had little success. Did any version support RX01's?
TTFN - Guy
I might have an image of a DOS/BATCH RK05 media,
but it might be hiding?????????????????????????????
Sincerely yours,
Jerome Fine
--
If you attempted to send a reply and the original e-mail
address has been discontinued due a high volume of junk
e-mail, then the semi-permanent e-mail address can be
obtained by replacing the four characters preceding the
'at' with the four digits of the current year.