16 Jun
2010
16 Jun
'10
2:22 p.m.
It's just a straightforward 16-pin DIP to DB25 IDC ribbon cable, DIP pin 16
aligned with DB25 pin 1.
Boy, those are huge files, almost 70MB; my copy from Howard Harte's site is
only 3MB (there are several revisions BTW).
mike
*******************************************
Date: Wed, 16 Jun 2010 08:35:50 -0400
From: "Bill Degnan" <billdeg at degnanco.com>
Subject: re: pinout for Vector Graphic's ZCB cable
I have a Vector Graphic's ZCB cable that is wired for a 9600b 8/n/1
serial
terminal. It was working yesterday, but the
connections were brittle and
a
few of the wires have come loose from the 25-pin
connector. I can see
the
spots where the solder was applied but I am not
confident that I have the
correct repair points. Does anyone have the pinouts
for this cable so I
can re-solder/replace? <snip>
I believe this is the answer to my question
page 10 of
http://vector-graphic.info/vg_zcb.aspx (download/part 2)
Bill