Wavemate Bullet info/docs needed

Hello all, I recently got a bare Wavemate Bullet board, and would like to get it up and running. I received some 8" floppies with it, and they appear to be boot disks for the board. All but one was readable on another CP/M system. I'd like to get docs for it, or pointers to more information on the board. It's a Z-80 based board, and has the CPU, DART, CTC, DMA, and PIO chips. Looks like it has some RAM (16 MB8264), and some glue logic, plus a Fairchild MB8877. It is labeled "Wavemate (c) 1981 Rev. B Hawthorne, CA. Made in U.S.A." There are two 10-pin headers marked "J3" and "J4", two 50-pin headers marked "J1" and "J6", and two 34-pin headers marked "J2" and "J7". I suspect J3 and J4 are serial I/O, as the traces go to a set of 1488/1489 chips. J1 and J2 are next to each other on the right of the board, and J7 and J6 are next to each other on the top of the board. There's also another 34-pin header near the top right marked "J5". There's an 8-position DIP switch labeled "SW1". Power appears to be from a plug that loks like a typical PC-style drive power connector. I'd like to verify the pinout, though, if possible :-) Curiously, there's no EPROM, nor even a socket for one. My luck, it's some missing part :-( I'd appreciate any help! Thanks, Rich B.