22 May
2017
22 May
'17
11:07 p.m.
You probably need a null modem cable. As a test try linking 4+5 (rts/cts) and 6+8+20
(dsr/cd/dtr) on the tty plug/socket. (25 way pins)
Then when the terminal brings dtr up (data terminal ready) it also brings up dsr (data set
ready) and cd (carrier detect) so it looks like the modem is connected.
Same way when it uses rts (request to send) it also enables cts (clear to send) so the
modem has given permission to send data..
Dave
G4ugm
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Jim Brain
via cctalk
Sent: 23 May 2017 05:58
To: Ethan Dicks <ethan.dicks at gmail.com>; General Discussion: On-Topic and
Off-Topic Posts <cctalk at classiccmp.org>; Paul Koning
<paulkoning at comcast.net>
Subject: Re: Teletype 43
On 5/22/2017 8:41 PM, Ethan Dicks via cctalk wrote:
Do you have a "traffic light"? I find them invaluable for diagnosing
handshaking and TxD/RxD swaps.
Yep. constant low on TX.
What worked was a serial port on a desktop. The first try.
It's entirely
possible, but I put a scope on the TX line, and I see no activity at
all with the unit in DATA or TERM READY mode. The DATA LED blinks, so I
think I need to signal the Model 43 that it is "connected".
As has been suggested, I joined GreenKeys and asked if someone has a
similar setup that works, so I can replicate.
Worst case is that the driver board has issues, which at least will narrow
down my search.
Jim