21 Nov
2002
21 Nov
'02
9:14 p.m.
I have an Intel Inboard 386/PC installed on one of my IBM PCs and a
bunch of docs and programs from the original Intel archive. Including
softset.exe ( !! thought it was gone for good. )
They mention a connector which is for the 386/PC piggyback
memory cards, Imeg (pcib1210), 2meg (pcib1220, and 4meg
(pcib1240).
The 386/AT was a bit different and did have a cable for
connection to expanded memory.
I'd kill for one of the PC piggyback cards. I like original machines
but I get great joy in pushing their parameters.
Lawrence
Hi - somewhere around this mess of equipment in my
office/computer room
(though i cant find it at the moment) i have a Wang 286 - not MCA - that
i upgraded long ago with an intel Above Board and and an Inboard 386 and
i seem to recall there being a connector that gave the Inboard 386
processor direct bus and memory acess to the Above Board instead of
having to go through the usually slower system bus - hope this bit of
info is correct and useful to you -billp
On Monday, November 18, 2002, at 11:51 , chris wrote:
lgwalker(a)mts.net
bigwalk_ca(a)yahoo.com
I have an MCA board here (probably pulled from a
PS/2, but I really am
not sure where it came from).
Its marked as an Intel Above Board MC. And currently has 8 30 pin
SIMMS on it (1 MB each it looks like). From what I can find, I think
this is just a normal above board memory expansion card (max 32 MB?)
However, there is also a 50 pin IDC connector on it. Is that for
connecting to a daughter card? I just want to confirm that fact, and
that this isn't really some kind of a SCSI controller with a nice
buffer on it. I thought the Above Boards were just memory cards, but
you never know. (maybe if I could find something about them on Intel's
site... but their AboveBoards support section seems to have vanished)
-chris
<http://www.mythtech.net>