Transformer repairs

I was messing around with my SX-64 (which is on ePay as a working unit) yesterday, having located some software & a joystick for it. I was going to take a few photos of the new bits, etc.; for adding to the listing. Then: *sharp snap/crack noise*, lights go out. Aaaargh! OK, first things first: There was no burning smell, and no (visible) magic smoke released. The fuse wire in the glass fuse has been vapourised; the mains fuse survived. I replaced the fuse, which has not since blown, but the PSU is deader than a dead thing that's been dead for a week. Some careful poking around with the multimeter (before the multimeter went bang - ffs, I must have an anti-midas touch this week), then the oscilliscope, reveals that a secondary transformer on the PSU has failed. I presume it went dead short, then burnt itself + the fuse out simultaneously; hence the reason the replacement fuse hasn't blown. So, what I need to do now is replace the transformer, or get it repaired somehow (ideally before Sunday, when the ePay auction runs out - or, to definitely know it is unfixable in that timescale & thus cancel the auction). What I DO have, which might make a repair feasible, is a second SX-64; the only difference is, this one has a US (117v) PSU. Obviously, the primary transformer windings are going to be different, but is it possible/likely that the secondary transformer will be the same? Going by the part nos. I'm not terribly hopeful: UK Part no: TDK 68-0409 B8326A US Part No: TDK 68-0407 B8309A A quick google on any of those numbers reveals nothing... I don't have the means to create 117v 60hz power, so I can't test that way - and even if I could, it turns out that the US PSU has taken a wallop at some point, breaking the circuit board. :( Hey ho... any help gratefully received. TIA! Best Regards, Ade. No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.1/1469 - Release Date: 27/05/2008 13:25