Looking for MSX2 expertise

Hi Alexandre! Thanks! Yes that would be great! Honestly, I don't know much of anything about MSX. Assuming we start with this as our baseline configuration 1. N8VEM 8 slot active termination S-100 backplane http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=S-100%20ba… ne 2. S100computers.com and N8VEM S-100 Z80 CPU board http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=S-100%20Z8… PU http://www.s100computers.com/My%20System%20Pages/Z80%20Board/Z80%20CPU%20Boa rd.htm 3. S100computers.com and N8VEM S-100 VDP http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=S-100%20VDP (caution, the S-100 VDP wiki is out of date) Are any changes necessary to the above boards to provide MSX and/or MSX2 compatibility? What else would be necessary to complete MSX and/or MSX2 compatibility? I assume some sort of S-100 board with 64K SRAM + IO. Probably a cartridge port, couple 8255 PPIs for control and ASCII keyboard and a serial port for a mouse? Is there any sort of interrupt controller or DMA controller? We can reuse the S-100 bus interface "glue" from other boards. What I am looking for is the components necessary for hardware compatibility. Thanks and have a nice day! Andrew Lynch