19 Jul
2002
19 Jul
'02
10:47 a.m.
That connector doesn't look like a HP-HIL connector. The HIL connector uses two
plastic locking tabs, one on each side of the connector. This one only has one tab and
it's on the bottom. If you look at the picture that I referenced the other day,
<http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2039310046>, you can see the
notches for the locking tabs on each side and none on the bottom (actuallyit would be on
top in this view).
My guess is that the machines that he's making thse for DO NOT use HP-HIL but
something else. Why don't you buy one and try it and let us know what you find out?
Joe
At 03:53 PM 7/19/02 +0200, you wrote:
I've heard this before, the item is listed here:
http://www.unixnerd.demon.co.uk/parts_unix.html
with a picture of it here:
http://www.unixnerd.demon.co.uk/ps2_cable.jpg
So what about it? It looks suspiciously like it's just a few wires. My guess
is that since he mentions it's for certain machines, that those machines have
ps/2 signals on the hp-hil connector. Any other ideas?
greetings,
Michiel
There's a guy in the UK that is selling an adaptor
for PS/2 KB's/mice to
HP-HIL that is supposedly just wired through... is this
possible?!?!?! does anyone have the pinouts for the HP-HIL port?
Totally impossible [1]. The signals are not even close between the 2
interfaces.
[1] OK, somebody could make a keyboard that could work with either PS/2
or HP-HIL interfacee sgnals with just a plug change, but AFAIK HP never
did. 