26 Sep
2006
26 Sep
'06
4:19 p.m.
On Tuesday 26 September 2006 07:03 pm, Sridhar Ayengar wrote:
Roy J. Tellason wrote:
I understand the need for the high-byte termination you mention here, as that
may be at the root of some of the problems that I've seen others mention in
this thread. What I don't understand is why a card that has only a 50-pin
internal connector would have a 68-pin connector on the external bracket.
It also came as a bit of a surprise to me that when I pulled out my box of
those cards I found that even though all three of them had the same model
number that they were apparently three different cards...
--
Member of the toughest, meanest, deadliest, most unrelenting -- and
ablest -- form of life in this section of space, a critter that can
be killed but can't be tamed. --Robert A. Heinlein, "The Puppet Masters"
-
Information is more dangerous than cannon to a society ruled by lies. --James
M Dakin
> I do have the book for the burner handy, and
the cable shown in there
> is round. And the connector on the burner (2 of them actually) is
> *smaller* than the external connector on the 2940,
If I'm right that you're running a 2940W (or 2940UW or 2940U2W) instead
of a 2940, the cable you're looking for is HONDA68 -> HONDA50 *with
high-byte termination*.