Magnetic tape filesystem

-----Original Message----- From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Chuck Guzis Sent: 09 February 2015 08:37 To: General at classiccmp.org; Discussion at classiccmp.org:On-Topic and Off- Topic Posts Subject: Re: Magnetic tape filesystem TI 99/4A initially presented the "wafertape" as an option (block-addressable- continuous loop). And, as mentioned, the stringy floppy, somewhat similar to the later wafertape and somewhat popular with the TRS-80 Model 1 crowd. The Coleco ADAM used a block-addressable tape, but I don't know what the read-after-write capability of the HE format tapes was. There's no reason that a 7- or 9-track tape could not be used as a random- access device, provided an adequate IRG was allowed for. Implementing read/write random-access filesystems on tape presents some significant issues. The first is the read-after-write physical block length problem, already discussed. The second is that extending files gets to be really interesting, unless file extensions get appended to the end-of-information point. The third is that it's pretty much impossible to deal gracefully with tape block flaws that develop some time after the block has been written. In particular, the usual 9-track method of erasing over the bad spot and then writing a new block would create a problem by overwriting already-written data. Streamer drives are singularly awkward (although as I mentioned, one of the QIC vendors implemented a "virtual disk" system for the PC (Archive, Seagate...I don't recall). Looking at the HP 35480 DDS OEM manual shows that the drive has to construct a new group from old data as well as new, write a temporary copy, then back up and attempt to rewrite the old data with the new. Ugly stuff. --Chuck