8 Feb
2002
8 Feb
'02
11:48 a.m.
On Fri, 8 Feb 2002, Tony Duell wrote:
Thanks for the offer :-)
I don't know if the PSU is the same, the HP P/N is 0950-2701
it's an ASTEC Model AA16510.
HP wants 251$ for a new PSU (IMHO more than the machine is worth) :-(
Why do you think the original PSU is beyond repair? Unless it's
physically broken in half or something. Most SMPSU faults can be
repaired relatively easily (at least compared to logic board problems
where there are custom chips to worry about).
Wire jumpers, some epoxy, and some silicone can even fix a physically
broken board in a pinch.
I don't
have access to a "HP Apollo 725/50" because the PSU died
and is beyond repair :-(
If it uses the same PSU as a 720, I might be able to get you one very
cheaply. I'm assuming you're getting no output at all?
Is the fuse OK (and if
not, did it fail violently, shattered or blackened)? Any obviously
burnt componnents on the PCB?
In the past, I've repaired even charred boards. Most of the materials pc
boards are made from carbonize and become conductive when exposed to
intense heat. I've used a dremel tool to cut/grind away carbonized areas
of boards and replace it with new material or wire jumpers. This is a
common problem in certain monitors due to a bad design of how the flyback
is mounted.
-Toth