18 Mar
2019
18 Mar
'19
8:51 p.m.
On 3/18/2019 9:15 PM, Charles Dickman via cctalk wrote:
What is the experience with the SCSI2SD with old
computers? It looks to be
SCSI-1 and SCSI-2 compatible and I see a lot of reports of usage on this
list. I am curious about how well it works and which version to get.
Versions up to 5 seem to be GPLed and reasonably available. V6 does not
seem to have schematics or boards open sourced and I haven't seen a
supplier for them. The web page lists some sources, but they don't have the
V6 available.
It looks like the V6 is not open because someone used the design without
following the GPL.
V6 claims synchronous transfers, but I don't think most of my hardware
supports it. That consists of VAXstations and qbus scsi cards. If I was
after speed I wouldn't be using old hardware, but the speed has to be
consistent with the era.
Chuck
I've had mixed success.? Neither a V5.1 nor a V6.03 worked with my MicroVAX
3100 M95, it's built in SCSI interface and OpenVMS V7.3.? Light access worked but as
soon as you tried any kind of actual work it threw hoards of mount verification messages
and errors piled up and became unusuable.
On the other hand, the V5.1 worked terrific on my Compaq AlphaServer DS10 with a Qlogic
ISP1020 SCSI card and OpenVMS V8.4
Others have had success with MicroVAXen and V7.3 and earlier so I think it's my
system, but I haven't had time to work it out yet.
--
John H. Reinhardt
PRRT&HS #8909
C&O HS #11530
N-Trak #7566