14 Dec
2017
14 Dec
'17
11:10 a.m.
On Thu, Dec 14, 2017 at 10:59 AM, John Welch via cctalk <
cctalk at classiccmp.org> wrote:
Now that I have the 11/04 running the next step is to
hook up to the RL02.
I need to run a cable from the M7762 to one of the connectors on the back
of the RL02. I have cabling stripped from a 11/04.
Is there a terminator that goes on the other connector on the RL02? The
machine that was stripped actually was a RL01, I hope the cable is the same
and if not someone will be able to advise me on that.
Do I need to set any jumpers on the M7762?
Are there any other things I should do the the RL02 prior to plugging it
into the wall and powering it on?
Sincerely,
John Welch
Assuming you have a bridge adapter that goes between the flat cable and the
drive cable. The bottom drive port should be terminated if you're not
connecting to a 2nd drive. Here is how I learned what I needed:
http://www.pdp-11.nl/peripherals/disk/rl-info.html
Bill