5 Mar
2003
5 Mar
'03
1:17 a.m.
the "correct" rack mounting I have for my BA23s is not rails, but a
sheet metal box they slide in, you can get the same basic function using
a couple of sheet metal (14GA) bits, bent into a L (or [ ] if you want
to get fancy and are having a shop do the work, but if you do the [ ],
you have to slot/hole/punch venting on the sides, if it is just L with a
side of 1" or so, it seems to vent fine.
Pavl_
"John A. Dundas III" wrote:
I have an existing 11/73 in a BA23 mounted in an H9644 cabinet (I believe
this is called "low boy"?), effectively a 19" rack/cabinet. I would like
to mount another BA23 for a MicroVAX II in the same cabinet. I have the
uVAX but no rails for it.
Any suggestion where to find these? Or what acceptable alternatives might
exist?
Thanks,
John
---------------------------------------------------------
John A. Dundas III
Director, Information Technology Services Infrastructure, Caltech
Mail Code: 014-81, Pasadena, CA 91125-8100
Phone: 626.395.3392 FAX: 626.449.6973
<mailto:dundas@caltech.edu>