12 Mar
2014
12 Mar
'14
10:09 a.m.
On 03/12/2014 12:22 PM, Ethan Dicks wrote:v
On Tue, Mar 11, 2014 at 7:03 AM, <anders at
abc80.net> wrote:
Most of the SMD parts are 3.3v..
There are though hole out there, likely you will need a programable part
to get 8.2mhz. Check Silicon Labs for parts, digikey and mouser.
Allison
I have traced the problem back to the RL8A. The
8,2MHz oscillator is not
working... unfortunately I was not
able to find a though hole mounted one, just a SMD part...
I did a quick search
and didn't see an obvious source of through-hole
oscillators at the right frequency (and it is a bit unusual), even
from US vendors.
One solution could be to mount an SMD oscillator in a 14-pin DIP
machined-pin socket frame (with 10 pins removed) either on a small PCB
or with flying leads and a spot of glue.
-ethan