8 Aug
2000
8 Aug
'00
2:36 p.m.
From: healyzh(a)aracnet.com <healyzh(a)aracnet.com>
I've set up two RL02 and a RX02 in a 48" rack with BA11S and a few
filler pannels.
A 36" rack is very doable too. The RX02 is ~11in, the RL01/2 is ~12in
and BA11S/N boxes are ~6" you might get that in a 30" rack.
An 11/23 with 256kb and RL02s will run V7 if it's not the I&D version.
Allison
Yes, $40-50 isn't bad, but as mentioned you've
got to consider shipping,
plus
it will probably go for quiet a bit more.
Never ship a PDP-11... way to heavy.
Ah, OK. I should have known there was a /23 equivalent
of the dual and
quad
hieght /73's.
Yep! M8189 come in two flavors, the difference is the roms. The +(B)
will
boot MSCP while the older ones don't know the RQDXn Controller.
The 11/23+ (11/23B) was used in the BA23 box aka micro pdp11/53.
> With RL01/2, RX01/2 and BA11S or N box that could
be stuffed into a
36"
small office
rack, likely it's a 40, 48" or larger one.
Hmmm, a 36" rack could be fun!!!