Yeah, I'm thinking mine is a Rev C that met the requirements for Rev D (seems to be a
D in marker).
If the board serial is what's in marker there, and is 1-00494 - that's pretty
close to the serial, so that would kind of line up. I just haven't been able to find
any other machines in the same serial range or even lower that don't have the Revision
that came after.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at
classiccmp.org] On Behalf Of Al Kossow via cctalk
Sent: Saturday, December 29, 2018 2:09 PM
To: cctalk at
classiccmp.org
Subject: Re: Osborne-1 with prototype-based motherboard
On 12/29/18 12:53 PM, Brad H via cctalk wrote:
I reached out to Lee Felsenstein on it and he
suggested it was related
to the boards produced for the 10 prototypes Osborne built
I'm pretty sure I threw one of those out about five years ago.
Will dig through the archive to see if there are any earlier schematics seems like most
out there are for the multi-layer board
the original technical manual mentions there were 6 revs of the pcb
http://bitsavers.org/pdf/osborne/osborne1/2F00153-01_Osborne1TechnicalManua… page
13