21 Jan
2005
21 Jan
'05
2:14 a.m.
On Fri, 2005-01-21 at 09:49 -0600, Dan Wright wrote:
On Thursday 20 January 2005 05:28 pm, Jules Richardson
wrote:
You might want to check -- the available partition types list from the kernel
on my laptop (linux 2.6.8.1) is:
<snip>
thanks for those - possible it might use the same as ultrix I suppose.
I've just got the system booting, albeit with a more modern SCSI drive
that I'd copied the raw disk image from the original drive to years ago.
Somewhat suprisingly it all still seems to work - only problem was that
the termination jumper had fallen off the bottom of the SCSI drive (so
there was an initial eek! where I thought the SCSI hardware might be
dead)
Funnily enough the original drive decided to behave and let me copy an
entire image from it under Linux too; in the past it's always given a
lot of read errors which is why I replaced it with a more modern one.
So, happy bunny at the moment - I've got a working machine, and a disk
image to play with.
There's three filesystems on the drive; root, data, and swap - hopefully
I can find something on the Tek to list the partition table itself...
cheers
Jules
Linux can
handle about a dozen different partition maps, and quite a few
file systems. You might be best to use dd to take an image off the hard
disk and then try and mount the image.
Worth a try I suppose; I have a feeling that Linux doesn't support that
many different partition formats though - dos/linux, sun/bsd, sgi, and
that's about it I think. It *might* use the sun/bsd format I suppose,
but seems more likely that it's something oddball.