Siemens T100 Terminal with Paper Tape - Available

Dominique, Nice to see your machine working so well! I like how it lights up from the inside. To connect it to a computer, you could simply get a Volpe board that does the Baudot 60 mA loop to ASCII RS 232 conversion for you, or build one yourself like I did. Info on both here: https://www.curiousmarc.com/mechanical/teletype-model-19#h.p_2ltO4LwPtuZR Matc > On Dec 8, 2021, at 12:29 PM, Dominique Carlier via cctalk > <cctalk at classiccmp.org> wrote: > > ?The subject interests me because I have the same beast but which > only works in local mode. I currently don't know what is required to > send text in this monster through a computer > Below is a link to a video of my machine in action: > > https://www.youtube.com/watch?v=dL-XU855C80 > > Dominique > > On 8/12/2021 20:52, Paul Koning via cctalk wrote: >> No, it's 5 bit tape. ?2 data bits, transport sprocket holes, 3 data >> bits -- top to bottom on the reader (right side), left to right on >> the punch (left side). >> >> DEC PDP-10 systems used six bit code internally but I don't remember >> those appearing on punched tape. ?The punched tape machines I have >> seen with 6 channels are typesetting devices, from early tape >> operated Linotype machines (1940s vintage) to 1960s or 1970s era >> phototypesetters. ?Those are upper/lower case. >> >> ? ?paul >> >>> On Dec 8, 2021, at 2:23 PM, Mike Katz <bitwiz at 12bitsbest.com> wrote: >>> >>> I thought I had recalled that Baudot was 5 bits but the paper tape >>> is 6 bits across and I don't know of any 6 bit character codes >>> except for DECs upper case only character set and even their paper >>> tape had 8 bits so I guessed Baudot. >>> >>> On 12/8/2021 1:16 PM, Paul Koning wrote: >>>> 5 bit; if it really were 6 bits it would typically be typesetting >>>> codes. >>>> >>>> That's a relative of the machine used as console terminal on Dutch >>>> Electrologica X8 computers; I recognize the "Iron cross" symbol, >>>> the figures shift character on the D key. ?But some of the other >>>> function codes have different labels so it isn't actually the same >>>> model. >>>> >>>> The description I have says that the X8 console used CCITT-2, >>>> a.k.a., Baudot, code but with the bit order reversed. ?And also >>>> that it used the all-zeroes code as a printable character rather >>>> than as non-printing fill. >>>> >>>> ? ?paul