2 May
2006
2 May
'06
11:23 p.m.
From: Fred Cisin <cisin at xenosoft.com>
On Tue, 2 May 2006, dwight elvey wrote:
Thanks for the correction. I was thinking it was something else.
Dwight
Also, 34 was the answer. I put a piece of tape on
pin
34 of the 360K drive and all seems well now. It seems
like the 1.44M use that line for detecting the 720k
disk while the 360K used it for disk change. I just
couldn't recall what line was involved.
not quite "detecting"; "ready"