27 Jul
2015
27 Jul
'15
2:28 a.m.
I own two 7012 and could be interested in, if you can shipping overseas :)
-------- Messaggio originale --------
Da: Sean Caron <scaron at umich.edu>
Data:25/07/2015 16:17 (GMT+01:00)
A: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>,Sean Caron <scaron at umich.edu>
Oggetto: Re: IBM RT memory boards
If you're going to toss them otherwise, I'd be happy to keep them and give
them a good home until someone came along who could use them ... but I'll
take a backseat to anyone who's actually got one of those systems.
Best,
Sean
On Sat, Jul 25, 2015 at 9:29 AM, Mike Stein <mhs.stein at gmail.com> wrote:
Hello,
Thank you for your interest but it looks like my 70-year-old gray cells
have let me down again; it's been a few years since I scrapped this system
but after some discussion it turns out that these boards are actually for
an early RS/6000 (7012/7013).
My apologies for raising your hopes/wasting your time ;-(
(Anybody still interested?)
mike
----- Original Message ----- From: "supervinx" <supervinx at libero.it>
To: "General Discussion: On-Topic and Off-Topic Posts" <
cctalk at classiccmp.org>
Sent: Saturday, July 25, 2015 5:54 AM
Subject: R: IBM RT memory boards
? I'm interested in, if you can ship overseas
-------- Messaggio originale --------
Da: Mike Stein <mhs.stein at gmail.com>
Data:24/07/2015? 18:21? (GMT+01:00)
A: "General Discussion: On-Topic and Off-Topic Posts" <
cctalk at classiccmp.org>
Oggetto: IBM RT memory boards
I've got 4 4Mx32 memory boards here from an old RT
(AFAIR) in case anybody has a use for them.
Each board has 8 512Kx40 (32 bits + 8 ECC) modules
(20 pcs. 4x256).
Edge connector is DS 42+49
m