2 Feb
2018
2 Feb
'18
4:55 p.m.
An update to this.
I picked up the Alphaserver today, powered up fine. I reset the system password so I
could log in.
It is running OpenVMS 7.1 and has 7 disks in the Storageworks box.
When I log in only the boot disk shows up from the $ show dev command. Nothing else, no
CD, no tape which are all there.
On powerup it shows:
bus 2 slot 0 pka Qlogic ISP10x0
bus 2 slot 1 ewa DecChip 21040-AA
bus 2 slot 2 pua DEC KFPSA
bus 0 slot 11 dra Mylex DAC960
bus 0 slot 12 drb Mylex DAC960
bus 3 slot 0 pkb Qlogic ISP10x0
You?ve got a KZP*A, DE500, DSSI, pair of KZPAC (probably) and another KZP*A
I think 4 of the storageworks disks are in a Raid in
the storageworks (DRB). The DRA raid must have been external since on startup it spends
time waiting for it and finally gives up.
I?d pull whichever KZPAC isn?t connected to anything any more along with the KFPSA which
will speed up INIT if nothing else.
In console mode:
The first KZP*A has the CDROM and tape drive so that?s probably a KZPAA (Qlogic QLA1040),
the internal disk shelf must be split bus if you?ve got 7 drives in there, 3 on the 2nd
KZPAA (or BA) and 4 on the KZPAC.
>> show dev
DKA400 RRD45
DKB400 RZ28
DKB500 RZ29
DKB600 RZ29
DRA0 4 member RAID 5
DRA1 1 member JBOD
DRB0 4 member RAID 5
DVA0
MKA500 TLZ07
EWA0 mac address
PKA0 SCSI bus
PKB0 SCSI bus
PIA0 DSSI Bus ID 3 My desire is to setup this machine and use it,
however, I don't want to undo things I can't put back together again. Any
thoughts or advice?
See above :) Take out boards that aren?t connected to anything. I assume you?re doing a
MINIMUM boot which would explain the lack of devices when you log in?
Pictures may help too.
Cheers,
?
Adrian/Witchy
Binary Dinosaurs - Celebrating Computing History from 1972 onwards
w: binarydinosaurs.co.uk t: @binarydinosaurs
f: facebook.com/binarydinosaurs