17 Feb
2006
17 Feb
'06
2:46 p.m.
behind the drive. Works fine on a Qume DT-8. That
24vdc supply you
mention should do just fine, but the 5vdc draw may be heavier than you
think, particularly if you have the standard 220/330 terminators installed.
I've yet to see a floppy drive that used 220/330 ohm terminators. Every
one I've worked on just has a 150 ohm resistor to the +5V line. It'll
still draw the current if that line is pulled low, though.
-tony