13 Jun
2002
13 Jun
'02
12:54 a.m.
--- Tony Duell <ard(a)p850ug1.demon.co.uk> wrote:
None. I know what pico fuses look like. There is nothing anywhere
on these boards that resembles a fuse. I would expect one, too.
There isn't one.
On the back side, in copper, mine says...
JOULE POWER inc
107-001-027
and elsewhere it says, in copper
LCT60
and in ink
LCT60-1202
and on the top, in ink
802256101 rev c1
Good news is I found *another one*. This one (TK50) might have a working
supply. Have to check it out later.
-ethan
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
--- Tony Duell <ard(a)p850ug1.demon.co.uk> wrote:
fuses.
I am suprised. Are you sure there's not a soldered-in fuse (which might
look more like a resistor)? Oh, what the heck, I've dug mine out and
pulled the PSU...
Nope. Not the same at all. I have three identical units, but no > > Anyway, on my PCB there's a 120k
resistor (looks to be about 0.5W,
> > running parallel to the long edge of the PCB...
I can't find anything that closely resembles that. There is a largish
3K ceramic resistor next to the 470uF caps... it's good in all three
PSUs.
> My PSU is
made by 'Joule Power', apparently.
I've put my box away again. I
couldn't see an obvious model number on the
PSU board last night, but if you do post the numbers on yours I can dig
my unit out again and see if I can match them at all.